T2mi

User to user support, ask here if you don't know how to do or configure something
Post Reply
anto@
Posts: 27
Joined: Sat Jan 04, 2020 1:25 pm

T2mi

Post by anto@ »

good morning
i would like to know how to be able to see tp in T2mi with alt dvb latest version
you need a pid value I remember that on the Russian tp it was 4096 if I'm not mistaken on the 40 west SES 6 and other sat which is the value to enter

thank you
User avatar
crazycat
Posts: 20
Joined: Sat Jan 04, 2020 7:50 pm
Location: Ukraine, Kharkov
Contact:

Re: T2mi

Post by crazycat »

4096 is default T2-MI PID, but you can set any T2-MI PId in tp seach dialog
AltDVB-T2MI.PNG
AltDVB-T2MI.PNG (34.82 KiB) Viewed 159 times
anto@
Posts: 27
Joined: Sat Jan 04, 2020 1:25 pm

Re: T2mi

Post by anto@ »

tried now on the 49 east and the tp in T2mi found me the channels.
tomorrow I move the antenna to 40 west and try the T2mi again on this satellite

thank you

Image
anto@
Posts: 27
Joined: Sat Jan 04, 2020 1:25 pm

Re: T2mi

Post by anto@ »

tried now to insert the values ​​of 4096 for each transponder in T2 mi
the result does not change on the 40 west no channels found
only the data channel finds me
User avatar
Mr. Orbita
Posts: 96
Joined: Fri Jan 03, 2020 11:05 pm
Location: Warsaw
Contact:

Re: T2mi

Post by Mr. Orbita »

Are you sure that 4096 is the currect value?
4096 is not always the right PID.
I heard that for 40,5°W correct PID might be 64, but I did not had a chance to check.

You should check that accordingly to transmission, e.g. verify which PID has got the highest bitrate or check what PID is connected to the data channel that you have found?

Or maybe there's some other issue?
I've never checked that transmission.

Moreover as far as I know - at 40,5°W PLP is used, maybe need to set this besides T2-MI PID?

You can record Full TS, one minute will be fine, and upload somewhere. We will look at it and tell you why this is not working and how to set things to get it working.
EnoSat
Posts: 50
Joined: Sat Jan 04, 2020 8:43 am
Location: Slovakia
Contact:

Re: T2mi

Post by EnoSat »

08/2021
3887 L 4190 3/4 PLP 104 – TELEANTIOQUIA, TELEANTIOQUIA-HD-2
4000 L 3750 3/4 PLP 103 – CANAL TRECE, CANAL TRECE +
4012 L 9828 3/4 PLP 101 – Señal Colombia, Señal Institucional, Canal 1, EXPLOREMOS, RADIO NACIONAL, RADIONICA
4020 R 6700 5/6 T2MI_RCN scrambled in Tandberg/Director (maybe copy 4028R) , PDG Service
4061 L 3750 3/4 PLP 102 – CANAL CAPITAL, EUREKA - CAPITAL
4066 L 4280 3/4 PLP 108 – CANAL TRO, CANAL TRO HD2
4100 L 4287 3/5 PLP 107 TELECAFE, TELECAFE2
4111 L 4287 3/4 PLP 0 – TELEPACIFICO HD, ORIGEN CHANNEL, Radio_Telepacifico
4184 L 5000 3/4 PLP 106 – TELECARIBE, TELECARIBE PLUS, Sistema Cardinal
2021-08-31_14h47_58.png
2021-08-31_14h47_58.png (90.85 KiB) Viewed 141 times
2021-08-31_13h59_30.png
2021-08-31_13h59_30.png (87.86 KiB) Viewed 139 times
Last edited by EnoSat on Tue Nov 01, 2022 3:37 pm, edited 3 times in total.
Televes H30 FLEX
Gibertini OP100L /85E-53W/
WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W-30W/
TBS-5925 , TBS-5880 , TBS-5220 , Mutant HD51 , Ineos ZX4 , Coolstream Zee2 , Dreambox 900UHD/7020HD/500HD
anto@
Posts: 27
Joined: Sat Jan 04, 2020 1:25 pm

Re: T2mi

Post by anto@ »

I thank Mr. Orbita and Enosat

I confirm that the pid for the 40 west is 64
now I find the channels
EnoSat
Posts: 50
Joined: Sat Jan 04, 2020 8:43 am
Location: Slovakia
Contact:

Re: T2mi

Post by EnoSat »

4020R decrypt with key06
40W_4019V_PLP0.png
40W_4019V_PLP0.png (98.74 KiB) Viewed 95 times
40W_4019V_PLP1.png
40W_4019V_PLP1.png (68.98 KiB) Viewed 95 times
Televes H30 FLEX
Gibertini OP100L /85E-53W/
WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W-30W/
TBS-5925 , TBS-5880 , TBS-5220 , Mutant HD51 , Ineos ZX4 , Coolstream Zee2 , Dreambox 900UHD/7020HD/500HD
Post Reply