TBS-6903

Report here any bugs you found
Post Reply
zuchnet
Posts: 1
Joined: Sat Jan 04, 2020 3:34 pm

TBS-6903

Post by zuchnet »

Hi,
i am use TBS6903 with diseqc switch.
If use original BDA Interface 2.3.0.427 not switch to LNB.
If use BDA Interface 0.2.2.63 from CrazCat switch on LNB ok but signal occasional missing (Q=0 or 90 percent).
AltDVB1.png
AltDVB1.png (19.95 KiB) Viewed 3775 times
AltDVB5.png
AltDVB5.png (99.63 KiB) Viewed 3775 times
User avatar
altxro
Site Admin
Posts: 77
Joined: Fri Jan 03, 2020 7:25 pm
Location: Cluj-Napoca
Contact:

Re: TBS-6903

Post by altxro »

Unfortunately, DiseqC commands are not yet supported for TBS PCI-E cards. I have the TBS SDK and I'll try to implement it soon !
I have no idea why signal quality fluctuates between 0 and 90. Try to increase "Signal update interval" value from [Settings] -> [General]
Onacila
Posts: 7
Joined: Sun Jan 05, 2020 12:51 pm

Re: TBS-6903

Post by Onacila »

I use both TBS6983 PCIe and TBS6903 PCIe switch DiSEqC without problems.
TBS PCIe
TBS PCIe
PCIe TBS.jpg (38.3 KiB) Viewed 3703 times
Onacila
burakvi
Posts: 3
Joined: Sun Jan 05, 2020 1:20 pm

Re: TBS-6903

Post by burakvi »

the same problem I have is the solution. Thank you.
burakvi
Posts: 3
Joined: Sun Jan 05, 2020 1:20 pm

Re: TBS-6903

Post by burakvi »

Onacila wrote: Sun Jan 05, 2020 12:58 pm I use both TBS6983 PCIe and TBS6903 PCIe switch DiSEqC without problems.
PCIe TBS.jpg

Onacila
where did you get dev_bda2driver_v0.2.0.22
User avatar
altxro
Site Admin
Posts: 77
Joined: Fri Jan 03, 2020 7:25 pm
Location: Cluj-Napoca
Contact:

Re: TBS-6903

Post by altxro »

burakvi
Posts: 3
Joined: Sun Jan 05, 2020 1:20 pm

Re: TBS-6903

Post by burakvi »

thanks I solved the problem, it worked on 2.0.22 and 2.2.63 devices
Post Reply