Signal level problem

Report here any bugs you found
Post Reply
SatLinkX
Posts: 8
Joined: Sun Jan 05, 2020 12:24 pm

Signal level problem

Post by SatLinkX »

Hi,
I have a problem with signal level. L=0%, Q=100%
I use DVB-C/T2 Tuner Astrometa Sony Chip Driver Device Version 64.6.427.2017 [27.04.2017]


PS All channels are working, just level is the problem.
If you have the possibility to fix this it would be great.
Thanks.
SatLinkX
User avatar
altxro
Site Admin
Posts: 75
Joined: Fri Jan 03, 2020 7:25 pm
Location: Cluj-Napoca
Contact:

Re: Signal level problem

Post by altxro »

Hi SatLinkX,
Sorry, but I can't test it :( My Astrometa have a Panasonic MN88473 demod. I'm using it on "Cable" mode with driver 64.5.614.2016 (newest driver has some compatibility problems with Win10 x64) and signal L/Q is OK. How is working with other DVB players ?
SatLinkX
Posts: 8
Joined: Sun Jan 05, 2020 12:24 pm

Re: Signal level problem

Post by SatLinkX »

The same with other Players. So I guess the driver is the problem.
Thanks for answer.
SatLinkX
User avatar
altxro
Site Admin
Posts: 75
Joined: Fri Jan 03, 2020 7:25 pm
Location: Cluj-Napoca
Contact:

Re: Signal level problem

Post by altxro »

Try to downgrade to previous driver, maybe helps.

Strange, but a friend of mine reported a similar problem using a Sundtek DVB-T/C stick
(he don't know the model, only the hwid: VID_EB1A&PID_51B2&REV_0100)
SatLinkX
Posts: 8
Joined: Sun Jan 05, 2020 12:24 pm

Re: Signal level problem

Post by SatLinkX »

I ave try to downgrade driver to version 2016, but the driver doesn't work.
I have Device USB\VID_15F4&PID_0131&MI_00\6&34cd9560&2&0000

I had in the past a tuner with panasonic chip but it was burned. That tuner showd the signal corect.
SatLinkX
skyborg
Posts: 5
Joined: Fri Feb 28, 2020 11:13 am

Re: Signal level problem

Post by skyborg »

many cards have bad driver support, e.g. inverted strength/quality level

at least i can confirm this with pctv461e. quality bar is showing actual signal strength while level shows signal quality
User avatar
crazycat
Posts: 17
Joined: Sat Jan 04, 2020 7:50 pm
Location: Ukraine, Kharkov
Contact:

Re: Signal level problem

Post by crazycat »

this driver issue
SatLinkX wrote: Sun Jan 05, 2020 2:30 pm I ave try to downgrade driver to version 2016, but the driver doesn't work.
I have Device USB\VID_15F4&PID_0131&MI_00\6&34cd9560&2&0000
This driver not support Sony version (2018)
Post Reply